LicheePi Nano

From linux-sunxi.org
Jump to: navigation, search
LicheePi Nano
LicheePi Nano Front.jpg
Manufacturer Lichee-Pi
Dimensions 25.4mm x 33.0mm
Release Date 2018
Website [1]
Specifications
SoC F1C100s @ 408Mhz
DRAM 32MiB DDR @ 24M~408MHz
Power via GPIO pins or MicroUSB Jack
Features
LCD optional RGB LCD FPC
Touchscreen optional
Audio 2x speaker, 1x microphone via header pins
Network WiFi 802.11 b/g/n (ESP8089) optional via µSD
Storage µSD, on-board 16MB SPI NOR Flash
USB 1 USB2.0 OTG

This page needs to be properly filled according to the New Device Howto and the New Device Page guide.

Tiny development board about the size of an SD card.

Identification

The PCB has the following silkscreened on it:

LiCHEE
NANO

Sunxi support

Images

Optional. Add MANUFACTURER DEVICE specific sunxi ROM images here. E.g. a livesuit image or some other linux image which uses linux-sunxi code. Do not put non-sunxi images here, they should live under See also. If no sunxi based images are available, this section can be removed.

Manual build

You can build things for yourself by following our Manual build howto and by choosing from the configurations available below.

Mainline U-Boot

Use the licheepi_nano_defconfig build target. Available since U-Boot v2022.04.

Mainline Linux Kernel

Use the suniv-f1c100s-licheepi-nano.dts device-tree tree binary.

Tips, Tricks, Caveats

Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.

FEL mode

Just removing all SD Cards triggers FEL mode.

Device specific topic

If there are no further device specific topics to add, remove these sections.

Adding a serial port (voids warranty)

The UART0 RX and TX pins are on PE0 and PE1, connected to the GPIO header pins, close to the microSD card slot. They are also marked as U0TX and U0RX. They carry the 3.3V level signal from the SoC, refer to the UART howto for more details.

Pictures

Take some pictures of your device, upload them, and add them here. DO NOT UPLOAD PICTURES WHICH YOU PLUCKED OFF THE INTERNET.

See also

Add some nice to have links here. This includes related devices, and external links.

Manufacturer images

Optional. Add non-sunxi images in this section.