|Manufacturer||Eearl Group LTD|
|Dimensions||278mm x 188mm x 25mm|
|Release Date||August 2012|
|SoC||A10, @ 1Ghz|
|Power||DC 5V @ ?A, ??mAh 3.7V Li-Ion battery|
|LCD||1024x600 (10" ~16:9)|
|Audio||3.5mm headphone plug|
|Network||WiFi 802.11 b/g (Realtek RTL8192CU), 10/100Mbps Ethernet (Manufacturer device)|
|USB||3 USB2.0 Host, X USB2.0 OTG|
|Camera||0.3MP (640x480) front-facing|
If a device is special, then feel free to provide a terse description of what makes this device so special. But terse, no novels, no marketing blurp.
In android, under Settings->About Tablet, you will find:
- Model Number: DEVICE
- Build Number: SOC_BOARD_DEVICE_*.*
Everything works. Camera is UVC and requires a modified driver.
Debian (Squeeze) SD card image: a10_netbook_4gb.tar.xz
- For building u-boot, use the "H6" target.
- The .fex file can be found in sunxi-boards as h6.fex
Everything else is the same as the manual build howto.
Tips, Tricks, Caveats
There is a button marked uboot between the ram chips and the usb ports, which triggers FEL mode.
Adding a serial port (voids warranty)
Provide a short description of how to open the device. Perhaps explain how the pins can be most easily popped.
Locating the UART
Describe how to find the RX,TX,GND signals here, and mention the UART howto.
Also known as
The same motherboard could have been resold inside the 7" A10 Netbook.