Pentagram P5355

From linux-sunxi.org
Jump to: navigation, search
Pentagram P5355
Device front.jpg
Manufacturer Pentagram
Release Date 2013
Website Quadra 9.7
Specifications
SoC A31 @ 1 Ghz
DRAM 2 GiB DDR3 @ 624 MHz
NAND 16 GB
Features
LCD 2048×1536 (9.7” 4:3)
Touchscreen 10-finger capacitive (Silead gslX680)
Video HDMI (Type C — mini)
Audio 3.5 mm headphone plug, HDMI, internal speaker, internal microphone
Network WiFi 802.11 b/g/n (Realtek RTL8188EU)
Storage µSD
USB 1 µUSB 2.0 OTG
Camera 1.92 MPx (1600×1200) front, 1.92 MPx (1600×1200) rear

This page needs to be properly filled according to the New Device Howto and the New Device Page guide.


Contents

Identification

On the back of the device, the following is printed:

PENTAGRAM
TAB Quadra 9


In Android, under Settings→About Tablet, you will find:

  • Model Number: PENTAGRAM TAB Quadra 9.7
  • Build Number: fiber_pentagram977q9-eng 4.2.2 JDQ39 20130813 test-keys

Sunxi support

Current status

Give a brief overview of the current status of support under sunxi here.

Images

Optional. Add MANUFACTURER DEVICE specific sunxi ROM images here. E.g. a livesuit image or some other linux image which uses linux-sunxi code. Do not put non-sunxi images here, they should live under See also. If no sunxi based images are available, this section can be removed.

HW-Pack

Optional. Add MANUFACTURER DEVICE sunxi HW-pack specifics here. When empty, this section can be removed.

BSP

Optional. Add MANUFACTURER DEVICE sunxi BSP specifics here. When empty, this section can be removed.

Manual build

You can build things for yourself by following our Manual build howto and by choosing from the configurations available below.

U-Boot

Sunxi/Legacy U-Boot

Use the MANUFACTURER_DEVICE build target.

Mainline U-Boot

Use the MANUFACTURER_DEVICE build target.

Linux Kernel

Sunxi/Legacy Kernel

Mainline kernel

Tips, Tricks, Caveats

Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.

FEL mode

The Home button triggers FEL mode. It’s possible to run “sunxi-fel version” successfully, but e.g. “sunxi-fel read 0x42400000 0x82d0 boot1.header” fails with “usb_bulk_send() ERROR -7: Operation timed out”.


Pictures

Also known as

See also

Add some nice to have links here. This includes related devices, and external links.

Manufacturer images

Optional. Add non-sunxi images in this section.

Personal tools
Namespaces

Variants
Actions
Navigation
Tools