|Dimensions||186mm x 144mm x 14mm|
|Release Date||Month year|
|SoC||A10 @ 1Ghz|
|DRAM||512MiB DDR3 @ xxxMHz|
|Power||DC 5.2V @ 1A, ??00mAh 3.7V Li-Ion battery|
|LCD||800x480 (7" 16:9)|
|Touchscreen||5-finger capacitive (FocalTech FT5206)|
|Video||HDMI (Type C - mini)|
|Audio||3.5mm headphone plug, internal speaker, internal microphone|
|Network||WiFi 802.11 b/g/n (Realtek RTL8188CUS)|
|USB||X USB2.0 Host, X USB2.0 OTG|
Find out the strings as reported under settings.
In android, under Settings->About Tablet, you will find:
- Model Number: DEVICE
- Build Number: SOC_BOARD_DEVICE_*.*
Not supported. No patches have ever been submitted.
- For building u-boot, use the "MANUFACTURER_DEVICE" target.
- The .fex file can be found in sunxi-boards as MANUFACTURER_DEVICE.fex
Everything else is the same as the manual build howto.
Tips, Tricks, Caveats
The something button triggers FEL mode.
Adding a serial port (voids warranty)
Provide a short description of how to open the device. Explain how the pins can be most easily popped.
Locating the UART
There is a set of test pads above the SoC, all you have to do is solder on some wires according to our UART howto.
Take some pictures of your device, upload them, and add them here.
Also known as
List rebadged devices here.
Add some nice to have links here. This includes related devices, and external links.