|Dimensions||192mm x 122mm x 10.50mm|
|Release Date||April 2012|
|SoC||A10 @ 1Ghz|
|DRAM||512MiB DDR3 @ xxxMHz|
|Power||DC 5V @ ?A, 2800mAh 4.2V Li-Ion battery|
|LCD||800x480 (7" 16:9)|
|Touchscreen||X-finger capacitive (TODO: Manufacturer device)|
|Video||HDMI (Type C - mini)|
|Audio||3.5mm headphone plug, HDMI, internal speaker, internal microphone|
|Network||WiFi 802.11 b/g/n (Manufacturer device)|
|USB||1 USB2.0 OTG|
|Camera||0.3MP (640x480) front|
In android, under Settings->About Tablet, you will find:
- Model Number: P300(Funbook)
- Build Number: 97F1-D1-H2-H01-MMX.20120914
Give a brief overview of the current status of support under sunxi here.
Add MANUFACTURER DEVICE specific sunxi ROM images here. E.g. a livesuit image or some other linux image which uses linux-sunxi code.
Add MANUFACTURER DEVICE HW-pack specifics here.
Add MANUFACTURER DEVICE BSP specifics here.
- For building u-boot, use the "MANUFACTURER_DEVICE" target.
- The .fex file can be found in sunxi-boards as MANUFACTURER_DEVICE.fex
Everything else is the same as the manual build howto.
Tips, Tricks, Caveats
Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.
The something button triggers FEL mode.
Device specific topic
Adding a serial port (voids warranty)
This section explains how to attach a serial port to the device. Make sure it refers to our UART howto. For a development board, you can just mention how to find the header with the pins and include a picture, and you can remove the warranty voiding warning.
If necessary, provide a short description of how to open the device. Perhaps explain how the pins can be most easily popped. If pins do need to be popped, mention the Plastic tool howto.
Locating the UART
Describe how to find the RX,TX,GND signals here, and mention the UART howto.
Take some pictures of your device, upload them, and add them here.
Also known as
List rebadged devices here.
Add some nice to have links here. This includes related devices, and external links.