|Website||Device Product Page|
|Power||DC 5V @ 1A|
|Video||HDMI (Type A - full), Composite A/V|
|Audio||3.5mm headphone plug, HDMI, SPDIF|
|Network||WiFi 802.11 b/g/n (Manufacturer Device), 10/100Mbps Ethernet (Realtek RTL8201CP)|
|USB||2 USB2.0 Host|
In android, under Settings->About Tablet, you will find:
- Model Number: DEVICE
- Build Number: SOC_BOARD_DEVICE_*.*
There is no support yet for this device.
- For building u-boot, use the "MANUFACTURER_DEVICE" target.
- The .fex file can be found in sunxi-boards as MANUFACTURER_DEVICE.fex
Everything else is the same as the manual build howto.
Tips, Tricks, Caveats
Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.
The something button triggers FEL mode.
Device specific topic
Adding a serial port (voids warranty)
Three hidden screws can be found under the device. Once the screws are removed, the plastic case can be pried open.
The board itself is secured by three other screws; the device's LED cover is secured by two extra screws, which do not need to be removed to extract the board.
Locating the UART
The Mele has a 4 pin 2.0 pitch JST-PH connector available for its UART0 port, near the SD card slot. This is the same as some 90s analog audio cables which ran from a CDROM to the sound card. More information is available at our UART howto.
Also known as
There are no known rebadgers for this device.