LinkSprite pcDuino8 Uno

From linux-sunxi.org
Jump to: navigation, search
LinkSprite pcDuino8 Uno
PcDuino8 Uno Front.jpg
Manufacturer LinkSprite
Dimensions 96mm x 56mm x 20mm
Release Date October 2015
Website PcDuino8 Product Page
Specifications
SoC H8 @ 2Ghz
DRAM 1GiB DDR3 @ xxxMHz
Power DC 5V @ 2A (micro-usb)
Features
Video HDMI (Type A - full)
Audio 3.5mm headphone plug, HDMI
Network 10/100/1000Mbps Ethernet (Realtek RTL8211E)
Storage µSD
USB 1 USB2.0 Host, 1 USB2.0 OTG

This page needs to be properly filled according to the New Device Howto and the New Device Page guide.

If a device is special, then feel free to provide a terse description of what makes this device so special. But terse, no novels, no marketing blurb.

Contents

Identification

A white PCB with an H8 chip.

The PCB has the following silkscreened on it:

PcDuino8 Uno
V01
www.pcduino.com

In android, under Settings->About Tablet, you will find:

  • Model Number: DEVICE
  • Build Number: SOC_BOARD_DEVICE_*.*

Sunxi support

Current status

There currently is no support for this board. There are other H8 devices supported, so support may be possible.

Manual build

You can build things for yourself by following our Manual build howto and by choosing from the configurations available below.

U-Boot

Sunxi/Legacy U-Boot

Unsupported.

Mainline U-Boot

Unsupported.

Linux Kernel

Sunxi/Legacy Kernel

Unsupported.

Mainline kernel

Unsupported.

Tips, Tricks, Caveats

CPU Heating issues

The A83/H8 absolutely needs a heatsink, active cooling is heavily recommended, otherwise the CPU will lower max frequency or even stop using cores.

FEL mode

The UBOOT button triggers FEL mode.

Arduino Compatability

pcDuino8 Uno is pin to pin compatible with Arduino so that existing Arduino shields can be installed on pcDuino and many Arduino libraries can run in pcDuino programming environment.

Adding a serial port

Locating the UART

The pcDuino8 Uno provides access two of the H8's UARTs. See the UART howto for more details.

The 3-pin header labelled "UART" sticking out from the side of the board is the H8's UART0. Pin 1 (with a square pad, closest to the uSD slot) is TX, pin 2 is ground, pin 3 is RX.

UART3 is available on the Arduino connectors. UART3 is in the standard place for an Arduino UART.

Pictures

Also known as

This device has not been rebadged.

See also

Manufacturer images

The Ubuntu 14 image that LinkSprite provides uses a modified linux-sunxi 3.4.39 kernel. Their patches and build scripts are available on GitHub.

There is also a Ubuntu 14 image bundled with OpenCV.

Also available is an Android 4.4 image provided by LinkSprite.

Personal tools
Namespaces

Variants
Actions
Navigation
Tools