Justop MPA040BKT

From linux-sunxi.org
Jump to: navigation, search
Justop MPA040BKT
Justop MPA040BKT.png
Manufacturer Justop
Dimensions 120mm x 90mm x 30mm
Release Date 11/2012
Website http://www.justop.com Device Product Page]
Specifications
SoC A10 @ 1.0Ghz
DRAM 1GiB DDR3 @ xxxMHz
NAND 4GB
Power DC 5V @ 1A, *3.3V coin cell battery needs 16mm socket soldered to the PCB pads
Features
LCD No
Touchscreen No
Video HDMI (Type A - full), Composite 3.5mm plug
Audio 3.5mm plug, HDMI, SPDIF
Network WiFi 802.11 b/g/n (Realtek RTL8188CTV), 10/100/1000Mbps Ethernet (Realtek RTL8201CP)
Storage SD
USB 1 X USB2.0 Host, 1 X USB2.0 OTG/FEL
Camera No

This page needs to be properly filled according to the New Device Howto and the New Device Page guide.

If a device is special, then feel free to provide a terse description of what makes this device so special. But terse, no novels, no marketing blurb.

Contents

Identification

This was sold in two versions with the main difference being the functionality of the remote IR controller. Very similar to Miniand Hackberry (1GB RAM version) and the images for the Hackberry work on this unit as well. Supplied with Android 4.0 that could be updated with various versions released by Justop (by the administrator Justin) on their old forums with the latest being "JUSTOP_A054_V1.8.1_20130809_ytb_fix_old_remote" or "new remote", depending on the hardware version). The forums are active again on https://www.tapatalk.com/groups/justop/ (as of July 2020) but all the old messages are gone.

Manual

File:Justop MPA040BKT V2 Manual.pdf

Original

There's nothing printed on the back.

The PCB has the following silkscreened on it:

RSH-A9-MAIN V1.5
2012-08-12

In android, under Settings->About Tablet, you will find:

  • Model Number: RSH_PUB_APOLLO
  • Build Number: apollo_rshhost-eng4.0.4

Sunxi support

Current status

Give a brief overview of the current status of support under sunxi here.

Images

Optional. Add MANUFACTURER DEVICE specific sunxi ROM images here. E.g. a livesuit image or some other linux image which uses linux-sunxi code. Do not put non-sunxi images here, they should live under See also. If no sunxi based images are available, this section can be removed.

HW-Pack

Optional. Add MANUFACTURER DEVICE sunxi HW-pack specifics here. When empty, this section can be removed.

BSP

Optional. Add MANUFACTURER DEVICE sunxi BSP specifics here. When empty, this section can be removed.

Manual build

You can build things for yourself by following our Manual build howto and by choosing from the configurations available below.

U-Boot

Sunxi/Legacy U-Boot

Use the MANUFACTURER_DEVICE build target.

Mainline U-Boot

Use the MANUFACTURER_DEVICE build target.

Linux Kernel

Sunxi/Legacy Kernel

Use the MANUFACTURER_DEVICE.fex file.

Mainline kernel

Use the FAMILY-CHIP-DEVICE.dtb device-tree binary.

Tips, Tricks, Caveats

Add MANUFACTURER DEVICE specific tips, tricks, Caveats and nice to have changes here.

FEL mode

The FEL mode can be triggered by shorting the two pads on the button K9 marked as FEL (see adding a serial port section below) or by sending number 2 over serial after powering on the device. Both trigger FEL but the second method provides initialization of the PIO according to "script.bin".

Device specific topic

If there are no further device specific topics to add, remove these sections.

...

Adding a serial port

UART pads

UART howto

The picture shows the serial port at the bottom. Pins left to right are:

- GND

- GND

- 3.3V

- RX

- TX


Device disassembly

If necessary, provide a short description of how to open the device. Perhaps explain how the pins can be most easily popped. If pins do need to be popped, mention the Plastic tool howto.

Locating the UART

Describe how to find the RX,TX,GND signals here, and mention the UART howto.

Pictures

Take some pictures of your device, upload them, and add them here. DO NOT UPLOAD PICTURES WHICH YOU PLUCKED OFF THE INTERNET.

Also known as

List rebadged devices here.

See also

Add some nice to have links here. This includes related devices, and external links.

Manufacturer images

Optional. Add non-sunxi images in this section.

Personal tools
Namespaces

Variants
Actions
Navigation
Tools