|Dimensions||193mm x 120mm x 12mm|
|Release Date||April 2012|
|SoC||A10 @ 1Ghz|
|DRAM||1GiB DDR3 @ xxxMHz|
|Power||DC 5V @ ?A, 3500mAh 3.7V Li-Ion battery|
|LCD||1024x600 (7" X:Y)|
|Touchscreen||5-finger capacitive (Goodix GT801)|
|Video||HDMI (Type C - mini)|
|Audio||3.5mm headphone plug, HDMI, internal speaker, internal microphone|
|Network||WiFi 802.11 b/g/n (Realtek RTL8188CUS)|
|USB||1 USB2.0 OTG|
|Camera||1.3MP (1280x1024) front|
In android, under Settings->About Tablet, you will find:
- Model Number: DEVICE
- Build Number: SOC_BOARD_DEVICE_*.*
No patches have been submitted and the board is not supported.
- For building u-boot, use the "MANUFACTURER_DEVICE" target.
- The .fex file can be found in sunxi-boards as MANUFACTURER_DEVICE.fex
Everything else is the same as the manual build howto.
Tips, Tricks, Caveats
The something button triggers FEL mode.
Adding a serial port (voids warranty)
The mainboard and battery are tied to the back cover, so be careful when opening this device . Use your [[Plastic_tool|plastic tool] to gently push the edge of the bottom cover outwards, you should soon hear clips releasing.
Locating the UART
Describe how to find the RX,TX,GND signals here, and mention the UART howto.
Take some pictures of your device, upload them, and add them here.
Also known as
The board was developed by Shenzhen Sochips Technology limited, and is called the Sochips SC3061. No other references turn up on the internet but the Icoo D70GT.