|Dimensions||width137mm x breadth12mm x height200mm|
|Release Date||Feb 2014|
|SoC||A33 @ 1.2 Ghz|
|DRAM||1GiB DDR3 @ 552 MHz|
|Power||DC 5V @ 2A, 4000mAh 3.7V Li-Ion battery|
|LCD||Width x Height (7.85" 1024:768) IPS [LP079X01]|
|Audio||3.5mm headphone plug, internal speaker, internal microphone|
|Network||WiFi 802.11 b/g/n [AP6476], Bluetooth 4 + LE|
|USB||Micro USB 2.0|
|Camera||0.3MP front, 2.0MP rear|
HP 8 G2 Model Model no. 1411
On the back of the device, the following is printed:
HP 8 PN J5T67AA RMN HSTNH-N408F
The PCB has the following silkscreened on it:
In android, under Settings->About Tablet, you will find:
- Model Number: HP 8 G2
- Build Number: KVT49L20150123
No official images exist, HP provide an update.zip from which fex files can be extracted
The unit will begin to boot if u-bot if built with Sinlinx_SinA33_defconfig
Interfaces appear and disappear while booting, but attempts to connect so far have been unsuccessful. Because the LCD isn't correctly configured no console shows on the screen.
The unit shares more similarities with PHT_801H_A33_V1.0.fex but no defconfig file exists
The unit can be put into FEL mode by booting with a suitable microsd card. See instructions for sunxi-tools
If connected via adb attempts to access bootloader or fastboot softbricks the device.
It MAY be possible to recover by allowing the battery to run completely flat, turn the unit on, wait for boot logo to appear, leave device to run down.
HP provide an illustrated guide for disassembly in the Service Document for this device.
Locating the UART
It may be possible to access the UART via the microSD slot
Also known as
The device was designed and manufactured for HP, no other versions are known.
Refer to HP website